Clock setting, Selecting the clock display, Time reset – Panasonic CQ-5301U User Manual
Page 8
M
U
T
E
CQ-5301U
8
Clock Setting
The 12-hour system is used for the clock.
Selecting the Clock Display
Press [DISP] to change the display.
[{ TUNE], [} TUNE]
(Hours, Minutes)
Time Setting
Time Reset
When you want to reset the time, repeat
steps q to r.
Note: • the current time will be displayed at
all the time even the power of the
radio is turned off.
• "Adj" is displayed before adjusting
the clock.
• Hold down [{] or [}] to change
numbers rapidly.
q Press [MODE] (POWER).
w Press [DISP] (CLOCK).
e Hold down [DISP] (CLOCK) for more than 2 seconds.
r Adjust the hour.
Press [}]: sets the hour ahead.
Press [{]: sets the hour back.
t Press [DISP] (CLOCK).
y Adjust the minute.
Press [}]: sets the hour ahead.
Press [{]: sets the hour back.
u Press [DISP] (CLOCK).
Radio mode display (default)
Clock display