New Holland 105A - Manual

New Holland
Rotary Tiller Specifications
105A
Page 1 of 1
MODEL 40-inch 52-inch 60-inch
Approximate working width, in. (mm) 40 (1016) 52 (1320.8) 60 (1524)
Tilling depth adjustment with guide shoes, in. (mm) ................................................................................0 to 4.5 (0 to 114.3) ................................................................................
Maximum tilling depth with guide shoes, in. (mm) .........................................................................................7.25 (184.2).......................................................................................
Hitch category ............................................................................................................................................................I ................................................................................................
Offset adjustment to right, in. (mm) ..................................................................................................................11 (279.4) ........................................................................................
PTO hp rating............................................................................................................................................................45...............................................................................................
Rotor drive type......................................................................................................................................................Chain ............................................................................................
Drive protection..................................................................................................................................................Slip clutch ........................................................................................
Rotor speed @ 540 rpm PTO
231 231 236
Number of blades 20 24 28
Blade tip speed (fpm) @ 540 rpm 1,043 1,043 1,063
Weight, lbs. (kg) 352 (159.7) 431 (195.5) 495 (224.5)
MODEL 72-inch 72-inch HD 80-inch HD
Approximate working width, in. (mm) 72 (1828.8) 72 (1828.8) 80 (2032)
Tilling depth adjustment with guide shoes, in. (mm) 0 to 4.5 (0 to 114.3) 0 to 5 (0 to 127.0) 0 to 5 (0 to 127.0)
Maximum tilling depth with guide shoes, in. (mm) 7.25 (184.2) 7 (177.8) 7 (177.8)
Hitch category I I or II I or II
Offset adjustment to right, in. (mm) ..................................................................................................................11 (279.4) ........................................................................................
PTO hp rating
45 60 60
Rotor drive type Chain Gear Gear
Drive protection..................................................................................................................................................Slip clutch ........................................................................................
Rotor speed @ 540 rpm PTO
236 211 211
Number of blades 36 36 40
Blade tip speed (fpm) @ 540 rpm 1,063 944 944
Weight, lbs. (kg) 596 (270.3) 765 (347) 810 (367)
Safety begins with a thorough understanding of
the equipment. Always make sure you and
your operators read the Operator’s Manual
before using the equipment. Pay close
attention to all safety and operating
decals and never operate machiner y
without all shields, protective devices
and structures in place.
Design, materials and/or specifications are subject to
change without notice and without liability therefor.
Specifications are applicable to units sold in Canada, the
United States, its territories and possessions, and may
var y outside these areas.
© 2008 CNH America LLC
New Holland is a registered trademark of CNH America LLC.
Visit our Web site at www.newholland.com/na. Or, call toll-free 866-NEW-HLND (866-639-4563).