Newcon Optik NC 20-60X80 - Manual (Page 8)

5
5. OPERATION INSTRUCTIONS
SET UP AND MOUNTING
1) Spread the tripod legs (A) and set the tripod on a firm
support. Loosen the adjustment screw (B) to place
mounting platform (C) in horizontal position, then
rotate the screw to lock mounting platform.
2) Position mounting shoe (D) of the spotting scope
body on the platform (C) then tighten mounting
screw (E) to firmly lock spotting scope body on the
platform.
3) Remove protective lens cap (F) on the objective (G)
lens.