NEC MT1056 - Manual (Page 54)

E – 54
Compatible Input Signal List
Signal Resolution Frequency H. Refresh Rate Dot Clock
( Dots ) ( kHz ) ( Hz ) ( MHz )
NTSC – 15.734 60 –
PAL – 15.625 50 –
SECAM – 15.625 50 –
VESA 640 ן 480 31.47 59.94 25.175
IBM 640 ן 480 31.47 60 25.175
MAC 640 ן 480 31.47 60 25.175
MAC 640 ן 480 34.97 66.67 31.334
MAC 640 ן 480 35 66.67 30.24
VESA 640 ן 480 37.86 72.81 31.5
VESA 640 ן 480 37.5 75 31.5
IBM 640 ן 480 39.375 75 31.49
VESA 640 ן 480 43.269 85.01 36
IBM 720 ן 350 31.469 70.09 28.322
VESA 720 ן 400 37.927 85.04 35.5
IBM 720 ן 350 39.44 87.85 35.5
IBM 720 ן 400 39.44 87.85 35.5
VESA 800 ן 600 35.16 56.25 36
VESA 800 ן 600 37.879 60.32 40
VESA 800 ן 600 48.077 72.19 50
VESA 800 ן 600 46.88 75 49.5
VESA 800 ן 600 53.674 85.06 56.25
MAC 832 ן 624 49.725 74.55 57.283
VESA 1024 ן 768 35.5 43 Interlaced 44.9
VESA 1024 ן 768 48.363 60 65
VESA 1024 ן 768 56.476 70.07 75
MAC 1024 ן 768 60.241 74.93 80
VESA 1024 ן 768 60.023 75.03 78.75
VESA 1024 ן 768 68.677 85 94.5
# VESA 1152 ן 864 67.5 75 108
# MAC 1152 ן 870 68.681 75.06 100
# SUN 1152 ן 900 61.796 65.95 92.94
# SGI 1152 ן 900 71.736 76.05 105.6
# VESA 1280 ן 960 60 60 108
# VESA 1280 ן 1024 63.981 60.02 108
# MAC 1280 ן 1024 69.89 65.2 118.5
# HP 1280 ן 1024 78.125 72.01 135
# SUN 1280 ן 1024 81.13 76.11 135
# VESA 1280 ן 1024 79.976 75.03 135
# VESA 1280 ן 1024 91.146 85.02 157.5
# HDTV (1080i)(1125i) 1920 ן 1080 33.75 60 Interlace 74.25
# HDTV (1080i)(1125i) 1920 ן 1080 28.13 50 Interlace 74.25
# HDTV (720p)(750p) 1280 ן 720 45 60 Progressive 74.25
# SDTV (480p)(525p) – 31.47 59.94 Progressive 27
# VESA 1600 ן 1200 75.0 60 162
# VESA 1600 ן 1200 81.3 65 175.5
# VESA 1600 ן 1200 87.5 70 189
# VESA 1600 ן 1200 93.75 75 202.5
DVD YCbCr – 15.734 59.94 Interlaced –
DVD YCbCr – 15.625 50 Interlaced –
#: Images in above flagged with # are compressed with Advanced AccuBlend.
NOTE 1: Some composite sync signals may not be displayed correctly.
NOTE 2: Signals other than those specified in the table above may not be displayed correctly. If this should
happen, change the refresh rate or resolution on your PC. Refer to Display Properties help section of
your PC for procedures.
NOTE 3: UXGA can be supported for separate sync signal only.