NEC LCD4215 - Manual (Page 24)

English-22
CUSTOM ZOOM “CUSTOM ZOOM” will be selected when you select “CUSTOM” on the screen “ZOOM” mode.
ZOOM Expands the horizontal and the vertical size simultaneously.
H ZOOM Expands the horizontal size only.
V ZOOM Expands the vertical size only.
H POS Moves to the right with + button. Moves to the left with - button.
V POS Moves up with + button. Moves down with - button.
H RESOLUTION Adjusts the horizontal size of the image.
INPUT RGB1, 2, 3 only
Press + button to expand, and press - button to narrow the width of the image on the screen.
V RESOLUTION Adjusts the vertical size of the image.
INPUT RGB1, 2, 3 only
Press + button to expand, and press - button to narrow the width of the image on the screen.
INPUT RESOLUTION Selects to decision of input signal timings 1024x768, 1280x768 and 1360x768, if there is a
INPUT RGB2, 3 only
detection problem.
If no problem is detected, the only available option will be “AUTO”.
ADJUST RESET Resets the all settings within the ADJUST menu back to factory setting.
BALANCE Adjust the balance of L/R volume.
TREBLE To accentuate or reduce the high frequency sound. Press + to increase, press - to decrease.
BASS To accentuate or reduce the low frequency sound. Press + to increase, press - to decrease.
AUDIO RESET Resets the all settings within the AUDIO menu back to factory setting.
OFF TIMER Sets the monitor to power off after a length of time.
A time between 1 to 24 hours is available.
SCHEDULE Creates a working schedule for the monitor to use. This OSD can’t remove except EXIT.
(See “NOTE 1” on page 25 for further information).
DATE AND TIME Sets the date, time, and daylight saving region.
Setting item: YEAR/MONTH/DAY/HOUR/MINUTE/DAYLIGHT SAVING TIME
Date & time must be set in order for the “SCHEDULE” function to operate.
SCHEDULE RESET Resets the all settings within the AUDIO menu back to factory setting except DATE AND
TIME setting.
PIP SIZE Selects the size of sub-picture used in “Picture-in-Picture” (PIP) mode.
“Large”, “Middle” and “Small” are available.
PIP AUDIO Selects the sound source in PIP mode.
PIP RESET Resets the all settings within the PIP menu back to factory setting.
LANGUAGE Selects the language used by the OSD from seven languages.
ENGLISH/DEUTSCH/FRANÇAIS/ESPAÑOL/ITALIANO/SVENSKA/
OSD TURN OFF Turns off the OSD after a period of inactivity. The preset choices are 5 - 120 seconds.
OSD V-POSITION Adjusts the vertical position of the OSD menu.
OSD H-POSITION Adjusts the horizontal position of the OSD menu.
INFORMATION OSD Selects the information OSD displays or not. The information OSD will display when input signal
or source change or warning message like as no-signal or out-of range.
A time between 1 to 10 seconds is available.
MONITOR INFORMATION Indicates the model and serial number of your monitor.
OSD RESET Resets the all settings within the OSD menu back to factory setting.
PIP
OSD
AUDIO
SCHEDULE