Numark Industries MX25 - Manual (Page 11)

MX25
- The Leader in DJ Technology
©2001 Numark Industries - 11 - http://www.numark.com
DESCRIPTION OF THE PLAY/PAUSE AND CUE OPERATIONS
PLAY and CUE
Pressing the “PLAY/PAUSE” button starts the disc. Pressing the “CUE” button will reset the disc to the last place
where the disc was started. This is called the cue point. By alternately pressing the “PLAY/PAUSE” button and the
“CUE” button, the disc may be returned and played from the cue point any number of times. This function is called back
cue.
PLAY, PAUSE and CUE
When Play is paused and then started again, the return position for the back cue will be updated as the new cue
point
EDITING CUE POINT
When the jog wheel is turned while a cue point is set, a new cue point can be located. The CD player will
repeatedly play small parts of the CD as you move it to the desired position. By pressing “PLAY/PAUSE” then “CUE” you
can confirm that this new cue point is desirable.