NETGEAR WPN802 - Manual (Page 39)

Reference Manual for the NETGEAR RangeMax™ Wireless Access Point WPN802
Wireless Configuration 4-11
202-10101-01, 4 May 2005
Select which of the four keys will be active.
6. Enable Wireless Client Security Separator: The associated wireless clients will not be able to
communicate with each other if this feature is enabled. The default setting is Disable.
7. Click Apply to save your settings.
Configuring Advanced Wireless Settings
Click on Wireless Settings under the Advanced Heading in the Main Menu to go to the Advanced
Wireless Settings page:
Figure 4-7: Advanced Wireless Settings page
Warning: The wireless access point is already configured with the optimum settings. Do not alter
these settings unless directed by NETGEAR support. Incorrect settings may disable the wireless
access point unexpectedly.
The advanced wireless settings are explained below:
• Enable SuperG Mode: Enable SuperG mode may increase the overall wireless performance.
Default: Disabled.
• RTS Threshold: Request to Send Threshold. The packet size that is used to determine if it
should use the CSMA/CD (Carrier Sense Multiple Access with Collision Detection)
mechanism or the CSMA/CA mechanism for packet transmission. With the CSMA/CD
transmission mechanism, the transmitting station sends out the actual packet as soon as it has
waited for the silence period. With the CSMA/CA transmission mechanism, the transmitting
station sends out an RTS packet to the receiving station, and waits for the receiving station to
send back a CTS (Clear to Send) packet before sending the actual packet data. Default: 2346.