Nokia 2118 - Manual (Page 52)

44 Copyright © 2005 Nokia. All rights reserved.
V o i c e
9. Voice
■ Voice dialling
You can dial up to 25 stored
numbers using voice dialling.
Before using voice tags, note the
following:
• Voice tags are not language
dependent. They are dependent
on the speaker’s voice.
• You must say the name exactly as
you said it when you recorded it.
• Voice tags are sensitive to
background noise. Record voice
tags and use them in a quiet
environment.
• Very short names are not accepted.
Use long names, and avoid similar
names for different numbers.
Note: Using voice tags may
be difficult in a noisy
environment or during an
emergency, so you should not
rely solely upon voice dialling
in all circumstances.
Assign a voice tag to an entry
Before you can use voice dialling,
you must first assign a voice tag to
the number.
1. In the standby mode, scroll down
to enter the contacts list.
2. Highlight the contact you want
to assign a voice tag, select
Details > Options > Add voice tag .
3. Select Start , then speak clearly
into the microphone.
Do not select Quit unless you want
to cancel the recording.
The phone automatically stops
recording, saves, and replays the
voice tag.
appears next to the
phone numbers which have voice
tags assigned.
If recording is not successful, your
phone displays
Voice system error .
Select Options > Add voice tag , and
repeat step 3.
Dial a number
1. Select and hold Contacts .
2. When you hear several beeps and
Speak now appears, release the
key.
3. Pronounce the voice tag clearly
into the microphone.
When the phone finds the voice
tag,
Found: appears, and the
phone automatically dials the
number. If the phone does not
locate a number or recognise the
voice tag,
No match found appears.