Nikon Coolpix L10 - Manual (Page 126)

116
Te
chn
ica
l Note
s
j Electronically Controlled Cameras
In extremely rare instances, unusual characters may appear in the monitor and
the camera may stop functioning. In most cases, this phenomenon is caused by a
strong external static charge. Turn the camera off, remove and replace the bat-
teries, and then turn the camera on again. In the event of continued malfunction,
contact your retailer or Nikon representative. Note that disconnecting the power
source as described above may result in the loss of any data not recorded to
internal memory or the memory card at the time the problem occurred. Data
already recorded will not be affected.
Transfer marking does
not appear
Pictures were marked for transfer
using another model of camera.
Select pictures for transfer using the
same model that initially took the
pictures.
—
PictureProject does not
start when camera is con-
nected
• Camera is off.
• Batteries are exhausted.
• USB cable is not correctly connected.
• Appropriate [USB] option is not
selected.
• Camera is not registered in Device
Manager (Windows only).
See the PictureProject reference man-
ual (on CD) for further information.
• Computer is not set to launch Pic-
tureProject automatically.
10
16
61
59, 60
—
—
Pictures not displayed on
television
Choose correct video mode.
Memory card contains no pictures.
Replace memory card. Remove mem-
ory card to play back pictures from
internal memory.
58
14
Pictures to be printed or
transferred are not dis-
played
Memory card contains no pictures.
Replace memory card. Remove mem-
ory card to print or transfer pictures
from internal memory.
—
Cannot select paper size
from camera
Paper size cannot be selected from
the camera if the printer does not
support the page sizes used by the
camera or the printer automatically
selects the page size. Use the printer
to select page size.
—
Problem Cause/Solution c