Nikon SF-200 - Manual (Page 15)

31
5. Maintenance
This chapter describes how to clean, store, and transport the SF-200 (S).
5.1 Cleaning
Before cleaning the feeder, remove it from the scanner. The exterior of the feeder is made of plastic, and
should not be cleaned with volatile cleaners such as alcohol or paint thinner. Use a blower to blow off
dust or wipe the surface with a dry cloth. If this is not sufficient to remove all dirt, clean with a cloth that
has been slightly dampened with a neutral detergent or liquid soap.
5.2 Storage
When you do not plan to use the feeder for an extended period of time, remove it from the scanner.
Store in a dry, well-ventilated environment, away from electronic equipment such as televisions or
radios which produce strong magnetic fields. Do not store the feeder where the temperature exceeds
60ºC (140ºF) or goes below –20ºC (–4ºF), or where the humidity is less than 20% or more than 90%.
5.3 Transport
When transporting the scanner, remove the feeder from the scanner and pack it in the original packing
material.
Warning: Do not use water or a volatile liquid such as alcohol, benzine, or thinner. Should
any of these liquids enter the feeder, fire or electric shock could result. Volatile chemicals
could also stain the plastic exterior of the feeder.