NorthStar Navigation EXPLORER 657 - Manual (Page 44)

Northstar Explorer 657 Installation and Operation Manual 44
10 Gauges window
The Gauges window shows boat data, such as
water speed, as analog gauges. To select the
Gauges window, press
, select More, then
select Gauges. Before using the Gauges window,
set Speed range, Max RPM and Max fuel flow (see
section 17-12).
Selecting a Gauges layout
To select a layout from the Gauges window, press
, select Layout, then select a layout from
the list.
Changing a gauge layout
You can change the data displayed on each
gauge in a layout.
1 Select the layout to change (see above).
2 Press and select Gauge setup.
3 Highlight the gauge to change. Press
and select the data to display in the gauge.
4 Repeat the above step to change other
gauges.
5 Press .
11 Data window
The data window has large numeric data fields
and a graph of depth and water temperature if
available. To go to the data window, press
,
select More, then select Data.
To select what data is displayed:
1 Press and select Data setup.
2 Change a data field:
i Press the cursor keys to highlight the
field.
ii Press to display a menu of data
items.
iii Select a data item that is available on your
system or select None to leave the field
empty.
3 Repeat the above step to set the other data
fields.
4 Press .