Technical specifications – NETGEAR FS102 User Manual
Page 15
Model FS102, Model FS104, Model FS108 Fast Ethernt Switch Installation Guide
General Specifications
Model FS102 Switch
Model FS104 Switch
Model FS108 Switch
Network Protocol and
Standards Compatibility
ISO/IEC 802-3 (ANSI/IEEE 802.3i) 10BASE-T Ethernet
IEEE 802.3u, IEEE802.3x 100BASE-TX, Fast Ethernet
Data Rate
100 Mbps with 4B/5B encoding and MLT-3 physical interface for 100BASE-TX
10 Mbps differential Manchester encoded
Interface
RJ-45 connector for 10BASE-T or 100BASE-TX Ethernet interface
Power Consumption
8 W
15.2 W
12 W
Input Voltage
(Power Adapter)
12 V dc
12 V dc
5 V dc
Physical Specifications
Dimensions:
6.2 x 1.06 x 4.1 in.
15.8 x 2.7 x 10.3 cm
9.27 x 1.06 x 4.1 in.
23.5 x 2.7 x 10.3 cm
9.27 x 1.06 x 4.1 in.
23.5 x 2.7 x 10.3 cm
Weight:
1.09 lb; 0.50 kg
1.60 lb; 0.73 kg
1.60 lb; 0.73 kg
Environmental Specifications
Operating temperature:
0
G
to 40
G
C (32
G
to 104
G
F)
Operating humidity:
90% maximum relative humidity, noncondensing
Electromagnetic
Emissions
CE mark, commercial; FCC Part 15, Class A; EN 55 022 (CISPR 22), Class A;
VCCI Class 1 ITE
Electromagnetic Susceptibility
CE mark, commercial
CE mark, commercial
CE mark, commercial
Electrostatic discharge
(ESD):
IEC 801-2, Level 2/3/4
IEC 801-2, Level 2/3/4
IEC 801-2, Level 2/3/4
Radiated electromagnetic
field:
IEC 801-3, Level 2
IEC 801-3, Level 2
IEC 801-3, Level 2
Electrical fast transient/burst:
IEC 801-4, Level 2
IEC 801-4, Level 2
IEC 801-4, Level 2
Electrical surge:
IEC 801-5, Level 2
IEC 801-5, Level 2
IEC 801-5, Level 2
Safety Agency Approvals
for Power Adapter
CE mark, commercial
UL listed (UL 1950)
CSA certified
(CSA 22.2 #950)
TUV licensed
(EN 60 950)
T-Mark
CE mark, commercial
UL listed (UL 1950)
CSA certified
(CSA 22.2 #950)
TUV licensed
(EN 60 950)
T-Mark
CE mark, commercial
UL listed (UL 1950)
CSA certified
(CSA 22.2 #950)
TUV licensed
(EN 60 950)
T-Mark
Performance Specifications
Frame filter rate:
14,800 frames/second, maximum on 10 Mbps port
148,000 frames/second, maximum on 100 Mbps port
Frame forward rate:
14,800 frames/second, maximum on 10 Mbps port
148,000 frames/second, maximum on 100 Mbps port
Network latency (using 64-
byte packets):
10 Mbps to 10 Mbps: 73 microseconds maximum
10 Mbps to 100 Mbps: 26 microseconds maximum
100 Mbps to 10 Mbps: 62 microseconds maximum
100 Mbps to 100 Mbps: 15 microseconds maximum
Address database size:
8,000 media access control (MAC) addresses per port
Addressing:
48-bit MAC address
Queue buffer:
10/100 Mbps ports: 1 MB of buffer space
for each port
10/100 Mbps ports: 128 k
of buffer space for each
port
Technical Specifications