NETGEAR ANT2409 - Manual (Page 14)

Installation Guide for the 9 dBi Omni-directional Antenna ANT2409
2-2 Installing the 9 dBi Omni-directional Antenna
First, Assemble and Mount the Antenna
Figure 2-1: Antenna Assembly and Mounting
Step Procedure
Step 1 Feed the antenna cable through the antenna
mounting assembly.
Note: Use the correct cable.
• Outdoors: use the provided 2m antenna
cable.
• Indoors: use the provided N/SMA adapter
with a Netgear cable model
ACC-10314-01, 02, 03, 04 or 05 (sold
separately). For indoors, d
o not use the
provided 2m cable.
Step 2 Securely attach the antenna cable by screwing
it onto the antenna.
Step 3 Insert the antenna into the mounting assembly.
Step 4 Position the key slot on the antenna so that it
is aligned with the mounting screw hole
illustrated in step 5.
Step 5 Tighten the mounting screw so that it fits in the
key slot on the antenna.
Step 6 Attach the assembled antenna to the mounting
surface with the appropriate hardware (U-bolts
for pole mount, L-bracket or no bracket for flat
mount).
Note: The antenna can be mounted vertically
right-side-up or up-side-down.
#ABLE





3TEP
3TEP
3TEP
3TEP
3TEP
 3TEP