Nokia 2620 - Manual (Page 79)

Reference
71
Messages
The StreetPilot 2620/2660 uses an on-screen message system to alert you to unit operating characteris-
tics. To acknowledge a message, press the remote IN key or simply touch the message on the touchscreen.
Data Transfer Complete – Transfer of data to the unit from the PC software has been completed.
Database Error – A waypoint or route failed to store in memory. If the problem persists, return the unit to
Garmin for service.
Map Storage Error – Error with data on the internal disk drive. Return for repair.
Map Storage Error: Bad Format – Unrecognized data format. Return for repair.
Map Storage Error: File not Found – No map data on internal drive. Return for repair.
Map Storage Error: Too Many Maps Error: Too Many Maps – The internal disk drive contains more maps than the unit soft-
ware can process. Not all maps on disk will be shown.
Detail Maps Don’t Support Routing – Maps that are loaded on the internal disk drive do not support
automatic route calculation.
GPS Turned Off for Indoor Use – GPS satellite reception has been disabled for indoor use.
Lost Satellite Reception - The unit has lost satellite signals. Check antenna connections or try moving it
to a location with a clear view of the sky.
Memory is Full – The unit’s memory is full. To reduce the amount of memory used, delete unused routes,
waypoints, or track log data.
Route Data Transfer Complete – Route data has successfully been transferred to the unit.
Route Memory is Full – Route memory is full and no more routes can be saved or added (from another
GPS unit or a PC).
Route Truncated – The route has been truncated because it was too long. There are turns missing prior to
the destination.
Appendix E: Messages
190-00342-00_0A.indd 71 4/13/2004, 9:57:46 AM