Navman iCN700 - Manual (Page 91)

iCN 700 series | How do I install Custom Points of Interest?
91
3. Modify the POI settings as required:
If you want to... Then...
edit the POI category name type the name of the POI category in the POI Name field.
The file name cannot include spaces.
The category name will consist of the first 8 characters.
activate the POI to enable proximity
warnings select the Active check box.
If you do not activate the POI, you will not be able to
configure the Alert settings.
enable a visual warning when a POI of this
category is in close proximity select the Visual Alert check box.
enable a warning sound when a POI of this
category is in close proximity select the Audio Alert check box.
change the units used to measure distance
for this POI category select either the Metric or Imperial option.
select the distance from a POI of this
category at which the visual warning
should display or the warning chime should
sound select the distance from the Distance box.
indicate the priority of a POI of this
category when one or more additional
POIs are in the same vicinity move the POI Visibility Level slider left for lower priority or
right for higher priority.
select an icon to display on the map
screens for POIs of this category type the path to the icon file to be used to represent the POI
type, in the Icon File box, or click Browse to select the icon
file from your local or network drive. Once you have located
the icon file, select it and click Open.
The icon file must be a bitmap (.bmp) graphic with a
minimum size of 6x6 pixels and a maximum size of 32x32
pixels.
If you do not select a custom icon, a default icon will
display.
select a custom sound alert file to play
when a POI of this category is in close
proximity select a sound file from the list.
The list of sounds is formed from default sound files and
sound files that you have added using My Sounds Admin. For
more information, see "How do I add sound files to My
Sounds Admin?" on page 92.
Click to include a WAVE (.wav) sound file from your
computer or network.
Click to play the selected sound file.
If you do not select a custom sound file, a default sound
alert will play.
4. Click
OK to save the POI settings.
The Copy POIs window will open.
5. Select the destination media for the selected maps; for example, memory card or iCN internal memory, then
click Copy POI.
The POI file is saved to the iCN or memory card as a POI category.