Disabling the spi firewall, Setting up a default dmz server, Responding to a ping on the internet wan port – NETGEAR WPNT834 User Manual
Page 91: Disabling the spi firewall -12, Setting up a default dmz server -12, Responding to ping on internet wan port -12
Reference Manual for the RangeMax 240 Wireless Router WPNT834
8-12
Advanced Configuration of the Router
v1.0, November 2005
Disabling the SPI Firewall
The SPI (Stateful Inspection) Firewall protects your LAN against Denial of Service attacks. This
should only be disabled in special circumstances.
Setting Up a Default DMZ Server
The default DMZ server feature is helpful when using some online games and videoconferencing
applications that are incompatible with NAT. The router is programmed to recognize some of these
applications and to work properly with them, but there are other applications that may not function
well. In some cases, one local computer can run the application properly if that computer’s IP
address is entered as the default DMZ server.
Incoming traffic from the Internet is normally discarded by the router unless the traffic is a
response to one of your local computers or a service that you have configured in the Port
Forwarding / Port Triggering menu. Instead of discarding this traffic, you can have it forwarded to
one computer on your network. This computer is called the Default DMZ Server.
The WAN Setup menu lets you configure a Default DMZ Server.
To assign a computer or server to be a Default DMZ server, follow these steps:
1. Click WAN Setup link in the Advanced section of the main menu.
2. Type the IP address for that server. To remove the default DMZ server, replace the IP address
numbers with all zeros.
3. Click Apply.
Responding to a Ping on the Internet WAN Port
If you want the router to respond to a 'ping' from the Internet, click the Respond to Ping on
Internet WAN Port check box. This should only be used as a diagnostic tool, since it allows your
router to be discovered. Do not check this box unless you have a specific reason to do so.
Note: DMZ servers pose a security risk. A computer designated as the default DMZ
server loses much of the protection of the firewall, and is exposed to exploits from
the Internet. If compromised, the DMZ server can be used to attack your network.