Nokia MOBILE PHONE N86 - Manual (Page 138)

• Internet access point (IAP) to send and receive e-mail
and connect to the internet
Check the type of access point you need with your service
provider for the service you want to access. For availability
and subscription to packet data connection services,
contact your service provider.
Access points
Create a new access point
Select Menu > Tools > Settings and Connection >
Destinations .
You may receive access point settings in a message from
a service provider. Some or all access points may be preset
for your device by your service provider, and you may not
be able to change, create, edit, or remove them.
When you select one of the access point groups ( , ,
, , ), you can see the access point types:
indicates a protected access point
indicates a packet data access point
indicates a wireless LAN (WLAN) access point
Tip: You can create internet access points in a WLAN with
the WLAN wizard.
To create a new access point, select Access point .
The device asks to check for available connections. After
the search, connections that are already available are
displayed and can be shared by a new access point.
If you skip this step, you are asked to select a connection
method and to define the settings needed.
To edit the settings of an access point, select one of the
access point groups, scroll to an access point, and select
Edit . Use the instructions provided by your service
provider to edit the following:
Connection name — Enter a name for the connection.
Data bearer — Select the data connection type.
Depending on the data connection you select, only certain
setting fields are available. Fill in all fields marked with
Must be defined or with a red *. Other fields can be left
empty, unless your service provider has instructed
otherwise.
To use a data connection, your service provider must
support this feature, and if necessary, activate it for your
SIM card.
Create access point groups
Select Menu > Tools > Settings and Connection >
Destinations .
Some applications allow you to use access point groups to
connect to a network.
To avoid selecting which access point to use every time
the device attempts to connect to a network, you can
create a group that contains various access points, and
define the order in which the access points are used to
connect to a network.
For example, you can add wireless LAN (WLAN) and packet
data access points to an internet access point group and
use the group for browsing the web. If you give the WLAN
access point the higher priority, the device connects to the
138
Se
ttings