Nikon Monarch/Titanium - Manual (Page 7)

ITEMS SUPPLIED
Body
1pc.
Eyepiece Cap 1pair
Objective Cap
Grips (6.5-20x44 only) 2pcs.
Hex Key (6.5-20x44 only) 1pc.
Instructions
(1) Focusing
(1) Look through the eyepiece with your eye positioned about 10cm (4 in) away
from the eyepiece lens (Fig. 3-1), and you will see the Nikoplex reticle (Fig. 3-2),
the Crosshair with dot reticle (Fig. 3-3) or the Turkey Pro reticle (Fig. 3-4) the
Crosshair reticle (Fig. 3-5) or the Miliradian Dot reticle (Fig. 3-6), or the BDC
reticle (Fig. 3-7).
Be sure your eye is positioned within proper alignment and proper eye relief
otherwise the view will “black out”.
(2) Point the objective end of the scope at the sky (Do not point at the sun) or at
a plain unpatterned wall.
Loosen the lock ring. (2x20 only)
Turn the eyepiece adjustment counter-clockwise and then turn it clockwise until
the reticle appears sharp.
(2x20 only)
(3) Finally, without moving the eyepiece adjustment, turn the eyepiece lock ring
as Fig. 3-8 to end so that the eyepiece adjustment will be firmly locked.
The lock ring must be firmly tightened to ensure an air-tight seal.