Nokia NP1250 - Manual (Page 12)

1
⓭ Use the SELECT
▼ button to select [CA
CERTIFICATE] and press the ENTER
button.
A list of files (thumbnail screen) will be dis-
played.
⓮ On the thumbnail screen, select a digi-
tal certificate (DER format file) saved in
your USB memory device and press the
ENTER button.
• Select your root CA certificate here.
The selected digital certificate will be installed
on the projector.
⓯ After completing required settings, use
the SELECT ▼ button to select [OK] and
press the ENTER button.
The [WIRELESS] page will be returned.
⓰ Use the SELECT
▼ button to select [RE-
CONNECT] and press the ENTER but-
ton.
⓱ Use the SELECT
▼ button to select [OK]
and press the ENTER button.
This will complete setting [EAP-TLS] for
[EAP TYPE] in [WPA-EAP] or [WPA2-EAP].
HINT:
Clearing the digital certificate that is installed on the projector
To clear the digital certificate installed on the projector, follow the steps below.
By doing the following procedure, all the digital certificates for the currently displayed profile
will be cleared.
❶ Select [CLEAR CERTIFICATES] in the bot-
tom left of the [ADVANCED SETTINGS]
screen and press the ENTER button.
A message for confirmation will be displayed.
❷ Select [YES] and press the ENTER button.
The digital certificates will be cleared.