Eizo CH2 - Manual (Page 2)

How to install ____________________________________
1.
Put screws into the left and right hoods.
NOTE
Attach the hood by using the specified screws
with referring to the labels on the packing
bags of the screws.
By over-driving the screws, the hood cannot
attach into the monitor.
(1) Put screws into the screw holes (2 places for
each) and drive it until the half-length of
screws coming up from the screw holes.
(2) Put the screw caps on each tips of screws.
Screw holes
(Ex. Right Hood)
2.
Attach the top hood to either the left or
right hood before attaching to the monitor.
3.
Attach the hood to the monitor.
NOTE
Attaching one hood and tightening the screws should be completed before going on to
the other hood.
(1) Attach the left hood to the monitor from
above and slide it from the side of the
monitor until the hood is firmly positioned
against the monitor.
(2) Hold the left hood and tighten two screws
on each side.
(3) Attach the right hood in the same way.
Top Hood
Right Hood
Left Hood