NETGEAR ME101 - Manual (Page 7)

Connecting One Device
Note: If you want to connect multiple devices, see the procedure on page 6.
1. Turn off the gaming console or other Ethernet-enabled device.
2. Connect the provided Ethernet cable between the ME101 Wireless Bridge and the gaming
console or other Ethernet-enabled device.
3. Connect the power adapter to the wireless bridge and plug the power adapter in to a
power outlet. The Power and Wireless LAN lights should light up.
4. After you see the Wireless LAN light light up, turn on the gaming console or other
Ethernet-enabled device.
If the bridge and the Ethernet-enabled device are successfully connected, the Network
light will light up. This light flashes when there is network activity.
Note: If your setup works with the default settings, you don’t need to install the software
from the provided CD to configure the bridge unless you need to change the
Country/Region setting from the default setting (U.S.A.) or you have more than one
ME101 bridge on your network.
Default Ethernet Antenna DC in 5V
Gaming console or other
Ethernet-enabled device
ME101 Wireless
Ethernet Bridge
5