Neumann.Berlin TLM 67 - Manual (Page 145)

145
Connecting Cables
Microphone Cable IC 3 mt
Microphone cable with double twist
(double helix) braiding as shield.
Ø 5 mm, length 10 m. XLR 3 connectors,
matte black.
IC 3 mt (10 m) ..... blk ........ Cat. No. 006543
Microphone Cable IC 4 (mt)
Microphone cable with rotatable swivel
mount for microphones with a thread,
and double twist braiding as shield. It
has a 5/8"-27 female thread, plus a
thread adapter to connect to 1/2"- and
3/8" stands. Ø 5 mm, length 10 m. XLR 3
connectors.
IC 4 (10 m) .......... ni .......... Cat. No. 006547
IC 4 mt (10m) ..... blk ........ Cat. No. 006557
Microphone Cable IC 7
Microphone cable with double twist
(double helix) braiding as shield.
Ø 5 mm, length 10 m. XLR 7 connectors.
Extends KT 5/KT 6.
IC 7 (10 m) .......... ni ........... Cat.No. 006740
Microphone Cable KT 5
Cable for RSM 191, with double twist
(double helix) braiding as shield.
Ø 5 mm, length 5 m. DIN 7 F and
XLR 7 M connectors.
KT 5 (5 m) ........... blk ........ Cat. No. 006719
Microphone Cable IC 6 (mt)
Microphone cable with rotatable swivel
mount for microphones with a thread,
and double twist braiding as shield. It
has a 5/8"-27 female thread, plus a
thread adapter to connect to 1/2"- and
3/8" stands. Ø 5 mm, length 10 m. XLR 5
connectors.
IC 6 (10 m) .......... ni .......... Cat. No. 006621
IC 6 mt (10 m) ..... blk ........ Cat. No. 006622
Microphone Cable IC 5 (mt)
Microphone cable with double twist
(double helix) braiding as shield.
Ø 5 mm, length 10 m. XLR 5 connectors.
IC 5 (10 m) .......... ni .......... Cat. No. 006623
IC 5 mt (10 m) ..... blk ........ Cat. No. 006624
Microphone Cable KT 6
Cable for RSM 191 with rotatable swivel
mount, and double twist braiding as
shield. It has a 5/8"-27 female thread,
plus a thread adapter to connect to
1/2"- and 3/8" stands. Ø 5 mm, length
10 m. DIN 7 F and XLR 7 M connectors.
KT 6 (10 m) ......... blk ........ Cat. No. 006725
Microphone Cable KT 8
Cable for M 147/149/150 Tube, with
double twist (double helix) braiding as
shield. Ø 5 mm, length 10 m. DIN 8 con-
nectors.
KT 8 (10 m) ......... ni .......... Cat. No. 008407
Other cable lengths are available upon request! Cable material with-
out connectors see corresponding section on the following pages.
Even if very long (Neumann) cables are used, the electroacoustic characteristics of the microphone are not affected.Only with cable
lengths well over 300 m a high-frequency roll-off is noticeable.
Other cable lengths are available upon request!