Niles Audio IW2770LCR - Manual (Page 11)

9
Figure 6. Installing unit into a wall.
PAINTING THE GRILLE AND FRAME
Each StageFront FX and LCR frame and grille may be painted without the need for
primer. For best results when painting the grille, use a spray gun or airless sprayer,
thin the paint to prevent clogging of the grille holes, and apply several light coats
instead of one heavy one.
1. Install loudspeaker into wall.
2. Carefully peel adhesive-covering strips off of paint mask and align over magnets on
loudspeaker baffle. Gently press into place.
3. Paint the frame of the loudspeaker.
4. Paint the grille separately from the loudspeaker frame.
5. Reinstall grille after paint dries on all surfaces and the paint mask has been removed.
CHECKING LOUDSPEAKER PHASE
Loudspeaker wire has two conductors. On both your loudspeaker and amplifi er, one
conductor is attached to the negative (–) terminals, while the other is attached to
the positive (+) terminals. Usually, the wire is marked for your convenience, but the
marking can be done in the following different ways:
■ Stripe on one wire
■ Ribbed area you can feel on one conductor
■ Different colors of metal wire on each conductor
■ Fabric strand or string wound into one of the conductors
(CONTINUED ON NEXT PAGE)
Rear View
Front View