NETGEAR EXPRESS EVA9100 User Manual
Page 15
Digital Entertainer Express EVA9100 User Manual
Custom Installation and Configuraton
1-7
v1.0, October 2009
2. Set the video source selector on your TV to match the connection from your Digital
Entertainer Express. For example, if you used HDMI, set the TV to use Digital HD or HDMI
input.
TV brands use different methods to identify their video source selectors. Many use a
numbering system such as Input 1, Input 2 and so on. Others use names that vary according to
the manufacturer. Check the instructions that came with your TV if you are not sure.
3. Check the TV display. If it is not clear, aim the remote control at the Digital Entertainer
Express, and press TV Mode. You can cycle through the TV modes to get the best display. It
can take 3 or 4 seconds for each TV mode change.
4. When prompted, select a language.
5. When you hear the audio welcome tone, press
.
If you do not hear the audio welcome tone, check the connections to the Digital Entertainer
Express.
6. Select Custom Setup, and then specify the following settings:
•
Select the video mode. The selections that you see on the screen change if you use an
HDMI connection.
Note: If your TV has multiple inputs of a specific type (such as HDMI1 or HDMI2),
make sure that you have selected the correctly numbered input.
Table 1-2. Video Modes
Type of Cable and
Region
Available Video Modes
Analog cables
Standard TV NTSC 480i (works for most TVs in the US)
Standard TV 480p
HDTV Component 720p
HDTV Component 1080i
HDTV Component 1080p
HDTV Component 720p 50Hz
HDTV Component 1080i 50Hz
HDTV Component 1080p 50Hz