Nortel Networks 6120 - Manual (Page 6)

6 English
Place a call on hold Press FCN and then press the Hold softkey.
Resume a held call Press the LINE key followed by the line number
key.
End the call Press the END key. Be sure to do this at the
end of each call to return to the standby mode.
Change the speaker
volume
Press the volume up/down buttons on the side
of the Handset during the call.
Change the ring
volume
Press the volume up/down buttons on the side
of the Handset during ringing.
Stop the ringing Press the END key to silence the ring.
Activate or deactivate
the speakerphone
During a call, press FCN and then press the
Spkr softkey and speak towards the Handset.
Display additional
features
Press the Actv softkey to display a list of
features and available softkeys.
During a call press the FCN key to display a list
of available features and call-handling softkeys.
Change the profile Press the Prof softkey and use the Nav keys to
select a different profile. The selected profile is
marked with an asterisk (*).
Turn on the backlight The backlight comes on when any key is
pressed or when there is an incoming call and
stays on for 10 seconds. It turns off after 10
seconds if another key is not pressed within
that period.
If you want to Then