NETGEAR DM602 - Manual (Page 46)

Reference Manual for the Model DM602 ADSL Modem
5-6 Advanced Configuration of the Modem
Click on the “Show Statistics” button to display modem usage statistics, as shown in Figure 5-5
below:
Figure 5-5. Show Statistics screen
This screen shows the following statistics:.
Modem These parameters apply to the ADSL modem section of the modem.
ADSL Firmware Version This field displays the ADSL chipset firmware version.
Modem Status This field displays the state of the ADSL connection to your service
provider, either “Connecting” or “Connected”
Connect Mode This field displays the protocol used to connect to your service provider.
When the ADSL link comes up, the connection will be either “Fast” or
“Interleaved”, depending on the way the telephone company has
configured its equipment
Down Stream This field displays the connection rate from the service provider to the
modem in bits per second
Up Stream This field displays the connection rate from the modem to the service
provider in bits per second
VPI This field displays the VPI entered in the Setup Wizard or Basic Settings
screen
VCI This field displays the VCI entered in the Setup Wizard or Basic Settings
screen
Table 5-4. Modem Statistics Fields
Field Description
Port The statistics for the ADSL WAN (Internet) and LAN (local) ports.
Status The link status of the port.
Table 5-3. Router Status Fields
Field Description
DM602.book Page 6 Friday, October 4, 2002 4:22 PM