Nokia M10 - Manual (Page 130)

Management
DRAFT
E Copyright Nokia Telecommunications Oy NTC C33539002SE_A0 5-81
Command Set unacknowledged termination request maximum
Description Specifies the maximum number of unacknowledged
termination requests that your Nokia M10 will send be-
fore terminating the PPP link on the specified ATM
channel.
Syntax set ppp module {vccx} terminate-max [integer]
Arguments The first argument identifies the ATM channel (vccx, x =
1 ... 8). The
integer argument can be any number
between 1 and 10.
Example m10> set ppp module vcc2 terminate-max 2
Command Set PPP timeout
Description Specifies the number of seconds the Nokia M10 must
wait for communication activity before terminating the
PPP link on the specified ATM channel.
Syntax set ppp module {vccx} timeout [integer]
Arguments The first argument identifies the ATM channel (vccx, x =
1 ... 8). The
integer argument is the timeout in sec-
onds. If you enter value 0 the connection will never time
out.
Example m10> set ppp module vcc2 timeout 0
Command Enable/disable CHAP port authentication
Description Enables/disables CHAP authentication for a port on the
specified ATM channel. CHAP authentication must be
enabled before you can enter other CHAP information.
If CHAP is on it will be the first authentication method
offered to a remote peer during link negotiation.
Syntax set ppp module {vccx} port-authentication chap-option
[on|off]
Arguments The first argument identifies the ATM channel (vccx, x =
1 ... 8). The second argument enables/disables CHAP
port authentication.
Example m10> set ppp module vcc2 port-authentica-
tion chap-option on