Network Instruments GigaStor 114ff - Manual (Page 24)

Connecting Observer to the GigaStor
Chapter 2 Installing Your GigaStor 24
rev. 1
Figure 8 Probe Instance Redirection
6 Select the probe instance and click Redirect Selected Instance.
Figure 9 appears.
Figure 9 Redirecting Probe or Probe Instance
7 Choose the “Redirect to this Observer” option, then click the
Redirect button. Within 30 seconds the GigaStor will connect to
the local Observer. If you use NAT, see “NAT” on page 124.
8 Close the Probe Instance Redirection window.
Probe administration
Now that your GigaStor is connected to your Observer console, you
can administer it.