Nortel Networks NN10265-111 User Manual
Page 25
MCS 5100 RTP Media Portal Basics
25
Copyright © Nortel Networks Limited 2006
3
The Load List window appears. The window only shows
software loads suitable for the RTP Media Portal component
type, since this is the component type being updated.
Figure 14 Load list for updating
4
Select the load version that should be used to update the RTP
Media Portal. Click on the Apply button.
5
The System Management Console displays the RTP Media
Portal configuration window. If required, modify any
configuration properties. For a description of these properties,
please refer to
Configuration tabs and properties on page 47
Make changes as needed, then click on the Apply button to
continue.
6
A window showing the progress of the update appears. Once the
update has completed, the Update successful message appears
showing that the RTP Media Portal component was successfully
updated.