Nuvo NV-MPS4 - Manual (Page 11)

If you are installing the Music Port Server with a Renovia System, plug the CAT5 directly into one of the three “NuVoNet”
inputs on the back panel of the Renovia Source Hub, Fig. 3.
USB USB
RS232 RS232
ETHERNET Passthrough To NuVo NuVoNet
SYSTEM
Fig. 3
Fig. 4
II. Accessing the Remote Configuration Tool
The Remote Configuration Tool is a quick, easy setup for the operation of the Music Port Server. Once configured, it will be
fully operational with any of the NuVoNet Audio Distribution Systems.
Make sure the NV-MPS4 is plugged in, powered on, and connected to the home’s router through its “Ethernet” port. A live
Internet connection will cause the port LED’s to light green, Fig. 4. It is suggested that you use the white CAT5 cable for this
purpose to avoid confusing it with the NuVoNet cables.
USB USB
RS232 RS232
ETHERNET Passthrough To NuVo NuVoNet
SYSTEM
Green LED’s indicate a
live Ethernet connection
7