N-Tron 405FXE-ST-YY User Manual
Page 14
(Revised 2010-11-15)
14
KEY SPECIFICATIONS
Physical
Height:
2.13" (5.41 cm)
Width:
5.00" (12.70 cm)
Depth:
3.00" (7.62 cm)
Weight:
~ 1.2 lbs. (0.6 kg)
(Note: can be mounted horizontally or vertically)
Electrical
Input Voltage:
10-30 VDC (Regulated)
Input Current:
220mA max. @ 24VDC (Steady State)
Inrush Current:
14.0Amp/0.9ms max. @ 24VDC
Input Ripple:
Less than 100 mV
Input Wire Size:
16-28 AWG
Environmental
Operating Temperature: -20°C to 70°C
Storage Temperature:
-40°C to 85°C
Operating Humidity:
10% to 90% (Non Condensing)
Operating Altitude:
0 to 10,000 ft.
Network Media
10BaseT:
> Cat-3 Cable
100BaseT:
> Cat-5 Cable
100BaseFX:
Multimode: 50-62.5/125µm Fiber
Singlemode: 7-10/125µm Fiber
Fiber Transceiver Characteristics
Fiber Length:
2km*
15km**
40km**
80km**
TX Power Min
-19dBm
-15dBm
-5dBm
-5dBm
RX Sensitivity Max:
-31dBm
-31dBm
-34dBm
-34dBm
Wavelength:
1310nm
1310nm
1310nm
1550nm
*=Multimode ** =Singlemode
Connectors
10/100BaseT:
5 (five) RJ45 UTP Ports
(405TX)
4 (four) RJ45 UTP Ports
(405FX/FXE)
100BaseFX:
SC or ST Duplex Port (405FX/FXE)
Recommended Minimum Wiring Clearance:
Front:
2" (5.08 cm)
(405TX)
4” (10.16 cm)
(405FX/FXE)
Side:
1" (2.54 cm)