Nikon WT-2 - Manual (Page 13)

6
Setup Using the Connection Wizard
First-time setup can be completed with the help of the Connection Wizard.
Before starting the Connection Wizard, make sure that network is active and
the destination ftp server is running. To prevent changes to settings from be-
ing lost should the camera monitor turn off automatically, use the optional AC
adapter or choose the maximum camera monitor off delay.
1 Turn the camera on.
3 Select FTP for Wireless LAN > Mode ( 24).
37 Upload photos to server as they are taken. Auto send
37 Delete photos from camera memory card after upload. Delete after send?
Description Option
38 Deselect all images selected for upload. Deselect all?
38 Send NEF + JPEG images as JPEG only or as NEF and JPEG. Send fi le as:
38 Upload all photos in selected folder. Send folder
Wireless Network Settings
For information on adjusting wireless network settings without using the Connection
Wizard, see “Menu Guide” (
26–35). See page 25 for information on loading set-
tings fi les created with a computer.
ftp Mode Settings
In addition to the settings made with the Connection Wizard, the following options are
available in ftp mode:
2 Check that Off is selected for the Wireless LAN >
Wireless LAN system option in the camera setup
menu (
24).