NETGEAR MA111 - Manual (Page 16)

User Manual for the NETGEAR 11 Mbps Wireless USB Adapter MA111
2-4 Introduction
202-10032-01
Connect to the
Internet over my
wireless
network.
1. Activate my
wireless link and
verify my network
connection.
2. Open an Internet
browser such as
Internet Explorer
or Netscape
Navigator.
1. An active Internet
connection like those from
cable or DSL service
providers.
2. A wireless network
connected to the cable or
DSL Internet service
through a cable/DSL
router as illustrated in
“How to Configure an
Infrastructure Mode
Profile” on page 4-2
.
3. TCP/IP Internet
networking software
installed and configured
on my PC according to the
requirements of the
Internet service provider.
4. A browser like Internet
Explorer or Netscape
Navigator.
To configure your MA111 in
Infrastructure Mode, see
“Basic
Installation Instructions” on
page 3-4
, and locate the section
for your version of Windows.
For assistance with configuring
the TCP/IP Internet software on
a PC, see
“Preparing Your
Computers for TCP/IP
Networking” on page C-1
or refer
to the PC Networking Tutorial on
the NETGEAR 11 Mbps Wireless
USB Adapter MA111 Resource
CD (240-10082-01) and the Help
information provided in the
Windows system you are using.
.
Table 2-1. A Road Map for How to Get There From Here
If I Want To? What Do I Do? What’s Needed? How Do I?