Appendix g touchscreen configuration, Touchscreen configuration – National Instruments Touch Panel Computer TPC-2012 User Manual
Page 43
© National Instruments Corporation
G-1
G
Touchscreen Configuration
This appendix explains how to configure the TPC-2012/TPC-2512
touchscreen using the PenMount Control Panel.
Touchscreen Calibration (TPC-2012)
To calibrate the TPC-2012, go to Start»Control Panel»Stylus, which
displays the Stylus Properties screen. You can set the double-tap sensitivity
in the Double-Tap tab. To recalibrate the stylus, use the Calibration tab.
Press the Recalibrate button, then press and briefly hold the stylus on the
center of each target as it appears on the screen. When finished, tap on the
screen with the stylus to save the settings.
Touchscreen Calibration (TPC-2512)
To calibrate the TPC-2512, go to Start»All Programs»PenMount USB
Utilities»Control Panel and click Calibrate. Here you can select either
Standard Calibration or Advanced Calibration. Follow the onscreen
instructions for either choice.