National Instruments Gigabit Ethernet (GigE) Interface Device NI PCIe-8231 - Manual

NI PCIe-8231 Quick Start Guide
The NI PCIe-8231 is a Gigabit Ethernet (GigE) interface device for PCI
Express. The following sections describe how to install and configure the
NI PCIe-8231.
What You Need to Get Started
You need the following items to set up and use the NI PCIe-8231.
❑
NI Vision Acquisition Software 8.2.1 or later
❑
NI Vision Acquisition Software Release Notes
❑
NI PCIe-8231 GigE interface device
❑
Computer running Windows 2000/XP with at least one PCIe slot
❑
GigE Vision Camera
❑
Ethernet cable
❑
Optional software packages and documentation:
– NI Vision Development Module
– NI Vision Builder for Automated Inspection
– LabVIEW
– LabWindows ™ /CVI ™
– Microsoft Visual Basic
Safety Information
Caution The following paragraphs contain important safety information you must follow
when installing and operating the device.
Do not operate the device in a manner not specified in the documentation.
Misuse of the device may result in a hazard and may compromise the safety
protection built into the device. If the device is damaged, turn it off and do