Nortel Networks MOBILE COMMUNICATION CLIENT 3100 - Manual (Page 61)

Advanced functions
Nortel Mobile Communication Client 3100 for Windows Mobile User Guide 61
Figure 10: Call-me-First mode
Use both call modes to configure a service number in your MCC 3100 for
Windows Mobile system settings. However, if you do not configure a
service number, you can only use the Call-me-First mode. For more
information, see
“Owner Information settings” on page 39 .
Calling individuals
The following options are available for calling an individual:
• “Dialing a number” on page 61
• “Calling from the Buddy list” on page 64
Dialing a number
Place a call by dialing an extension or telephone number.
1. Expand the Phone pane.
2. Select Menu, Input Method, Use keypad.
3. Dial the contact extension or PSTN number.
Note: To enter a + sign, press and hold the 0 key on the dialpad.
4. Specify your own number by doing one of the following:
— To use your mobile number in Direct Outbound mode, press the
green call button or select Menu, Call.