Setting monitor’s automatic brightness, Setting the automatic power off function – Eizo FlexScan Color LCD Monitor SX2262W User Manual
Page 30
0
Chapter 4 Power Saving Function
-. Setting Monitor’s Automatic Brightness Adjustment
[Auto EcoView]
The sensor on the lower side of the monitor detects the environmental brightness to adjust the screen
brightness automatically and comfortably by using the Auto EcoView function.
Attention
Be careful not to block the sensor on the lower side of the monitor when using the Auto EcoView function.
•
Procedure
Choose <PowerManager> from the Adjustment menu, and press
.
Choose <Auto EcoView> from the <PowerManager> menu, and press
.
Select “On” or “Off” with
or
.
Press
to exit the adjustment.
-. Setting the automatic power off function [Eco Timer]
This function allows you to switch the setting to turn off the monitor automatically after a specified time
has passed at the power saving mode.
Adjustable range: Disable, Enable (0, 1, 2, 3, 4, 5, 10, 15, 20, 25, 30, 45 min, 1-5h)
Procedure
Choose <PowerManager> from the Adjustment menu, and press
.
Choose <Eco Timer> from the <PowerManager> menu, and press
.
Select “Off” or time to turn off the monitor with
or
.
Press
to exit the adjustment.
1.
2.
3.
4.
1.
2.
3.
4.