NETGEAR XE104 User Manual
Page 24
Advertising
XE104 User Guide
3-10
Installing the XE104 Wall-Plugged Ethernet Switch
v1.0, September 2005
b. Start the PowerLine encryption utility and ensure that the Main tab is selected.
c.
Check that the utility lists all the remote PowerLine devices
d. Select a PowerLine device and, if more than one remote device is listed, identify it from
the MAC address.
e.
Click the button labelled Enter Password.
f.
Enter the password recorded from the label on the back of the selected PowerLine device.
g. Click OK.
Figure 3-11
Figure 3-12
Advertising