Nokia 9820 T - Manual (Page 13)

GB 14
FIRST TIME INSTALLATION
Channel Search
The Channel Search procedure can be performed in two differ-
ent ways.
• “Automatic Search” or “Manual Search.”
Manual Search
When you perform a Manual Search you first need to enter some
parameters for the channel search to work.
The information you need to enter in this menu is available from
your Service Provider.
Select channel: Specify the UHF channelnumber between 21 to
69. If you enter the wrong figure(s), erase with the button.
Transmission Mode: Select 8k.
Guard Interval: Select the value as you want.
Network Search: Select “Yes” if you want to search on all fre-
quencies in a specific network.
• Press OK to start searching for channels.
Automatic Search
• Start the Automatic Search on the digital terrestrial network
by pressing OK.
Channel Search Progress
In the Channel Search Progress Menu, you can start searching
for terrestrial digital channels offered by the TV transmitter for
which your antenna has been configured.
All TV channels found will be listed in a column on the screen.
Please note that the search procedure may take a few minutes.
When the search procedure has ended, the screen will show how
many TV channels have been found.
Press OK and continue to press OK until the channel number 1
shows on the front panel display. You will see the corresponding
programme on the TV screen.