North Star M1108D - Manual (Page 42)

Assembly Instructions
42
Step 7
Fasten Horizontal Beam Lock to
Beam using (2) Beam Bolts and (2)
Beam nuts
Tighten Bolts to 37 lb-ft with a
wrench
Fasten Handle to Beam as shown
using (2) Beam Bolts and (2) Beam
nuts
Tighten Bolts to 37 lb-ft
Step 8
Lower Beam to horizontal position
as described in the SPLITTING
OPERATION section of the manual
Fasten Vertical Beam Lock to
Beam using (2) Beam Bolts and (2)
Beam nuts
Tighten Bolts to 37 lb-ft
Fig 02422
Vertical
beam lock
Bolt
Step 9a
Mount Engine to Axle/Tank using
(4) Engine Bolts and (4) Engine
nuts
Tighten Bolts to 24 lb-ft
(Beam not shown for clarity)
Bolt
Engine
Axle/Tank
Fig 02423
Bolt
Handle
Horizontal
beam lock Bolt
Fig 02421