Restarting the installation – NCR S16 User Manual
Page 95
Rebooting the Server and Installing the Operating System
NCR S16 Minitower Server Installing Network Operating System
11-5
may boot using the maintenance disks, mount the drive on which the
installation failed, and read the LOG.INSTALL file in the /var/spool/install
directory.
Restarting the Installation
If the installation process is interrupted (canceled) at any time during the
performance of the installation procedures discussed in the following sections,
you can restart it by using one of the following methods:
•
If you accidentally remove Boot flex #2 or Boot flex #3 before the
installation completes, you must restart by rebooting the system from
Boot flex #1.
•
If you interrupt (cancel) the installation, you may restart the process by
pressing Ctrl + D.