Nortel Networks 2300 Series - Manual (Page 35)

35
Nortel WLAN - Security Switch 2300 Series Quick Start Guide
2 Click WSS_model Changes > Deploy from the smart menu.
The Deploy Configurations screen appears, and configuration changes are
automatically applies to the WSS.
3 Click Close.
End
Test the solution
Estimated timing: 10 minutes
Use a wireless NIC card to see if you can obtain an IP address and reach the Internet.
Where to go next
The basic WSS configuration is completed. Check Nortel WLAN—Security Switch 2300 Series
Installation and Basic Configuration Guide and Nortel WLAN Security Switch 2300 Series Configuration
Guide. for additional information and a complete listing of related Nortel WLAN Security Switch material.
Note: To view the list of pending changes, select Review from the smart
menu before deploying the configuration.
Security Alert: This quickstart guide installs and enables the
wireless network, but does not configure any security restrictions.
Any user with wireless access can use the network. See
“Where to go
next” on page 35 to find documents that provide additional information
for securing and configuring the WSS.