NetComm 802.11 - Manual (Page 65)

YML800NX Power 800NX Power X Power Power n User Guide
www.netcomm.com.au 5
802.11n Wireless Router
Repeater Mode –
Advanced Features
Repeater mode has limited settings compared to the AP mode. Choose “Repeater mode” on the top right corner of
the configuration page. System restarts and connects to the IP address http://192.168.20.1
You will see the configuration homepage under “REPEATER” mode now.
System
Status
System status section allows you to monitor the current status of your router. You can use the status page to
quickly see if you have any updated firmware available (bug fixes, updates). You can navigate from this page with
a few interesting options for reminding or skipping this page forever & so forth.
Once you click on <OK> button to go to the requested page, you can see the status page of the 800n Series.
You can see the UP time, hardware information, serial number as well as firmware version information.
LAN Settings: This page displays the Broadband router LAN port’s current LAN & WLAN information. It also shows
whether the DHCP Server function is enabled / disabled. Wireless configuration details such as SSID, Security
settings, BSSID, Channel number, mode of operation are briefly shown.
WLAN Settings: View Broadband router’s current configuration settings. Device Status displays the configuration
settings you’ve configured in the Wizard / Basic Settings / Wireless Settings section