Newcon Optik LRB 20000 - Manual (Page 5)

If you use Windows 95, 98 or ME:
- Turn computer on and enter the BIOS SETUP in accordance
with the computer documentation.
- Set the address of LPT port as 378h, and port type as EPP.
Register the new settings.
- After OS on your computer has been loaded, insert the
supplied diskette into the floppy disk drive.
- Run program with the name “BDEPP5.EXE”.
- Perform measurements as described in the manual. The
results will be shown in the communicator program window.
To exit the program, press the space key.
Complete the work in the following order: turn off the
LRB20000A power, take the disk out of the disk drive, and turn
the computer off.
TABLE OF CONTENTS
1. Overview
2. Abbreviations
3. Technical characteristics
4. Supplied accessories
5. Principles of work
6. Safety precautions
7. Preparing for use
8. Operating procedure
9. Serviceability test
10. Maintenance
11. Troubleshooting 12. Long term storage
13. Storage rules
14. Shipment
15. Rechargeable battery
handling
16. Data output to external
equipment
17. Warranty
18. Customer support
19. Acceptance certificate