Nikon Coolpix L19 - Manual (Page 104)

92
Basic Camera Setup: The Setup Menu
S
h
oot
in
g, P
laybac
k
an
d Se
tu
p Me
nus
U Motion detection
Set whether or not the camera automatically increases the shutter speed to
reduce blurring when motion is detected while shooting still pictures.
The motion detection setting can be confirmed on the monitor during shooting
(when set to Off, nothing is displayed) (
A 19).
When the camera detects shaking and increases shutter speed, the motion
detection indicator turns green.
B
Notes on Motion detection
• Blurring caused by camera shake or subject movement may not be eliminated if there is excessive
shake or movement.
• Motion detection may not function if camera shake or subject movement is excessive, or if there is
insufficient lighting.
• The pictures taken may become somewhat grainy.
h AF Assist
Change settings for AF-assist illumination.
Press d M z (setup menu) (A 83) M U Motion detection
Auto (default setting)
When camera detects the movement of the subject or camera shake, the shutter
speed will be increased for reducing the blur.
However, motion detection is not active when the flash fires.
Motion detection does not function in the following scene modes regardless of
the setting.
• When the scene mode is set to Night portrait (A 35), Dusk/dawn (A 36),
Fireworks show (
A 38) or Backlight (A 39)
Off
Motion detection is not enabled.
Press d M z (setup menu) (A 83) M h AF assist
Auto (default setting)
AF-assist illumination will be used to assist the focus operation when the subject is
poorly lit. The illuminator has a range of about 1.9 m (6 ft. 2.8 in.) at the maximum
wide-angle position and 1.1 m (3 ft. 7.3 in.) at the maximum telescopic position.
However, the AF-assist illumination will not turn on in some scene modes even if
Auto is selected (
A 34-38).
Off
Disable this function. The camera may be unable to focus if lighting is poor.