Napoleon Grills BIZC450 - Manual (Page 2)

STEP 3: Repeat step 2 for other
side panel. Ensure holes on face of
panel are facing you.
STEP 2: Slide side panel onto
bottom panel ensuring holes on face
of panel are facing you. Line up holes
and fasten with (4) #8 x 1/2” tek
screws provided.
STEP 1: Place stainless steel
bottom panel on table with gas
supply opening to the front left
hand corner as shown.
ASSEMBLING YOUR LINER
Gas Supply Opening
N010-0492 (BIZC450)
N010-0493 (BIZC600)
N010-0496 (BIZC450/600)
N570-0008 ( #8 x1/2” TEK SCREW)
N010-0496 (BIZC450/600)
N570-0008 ( #8 x1/2” TEK SCREW)