NEC MULTISYNC P461 - Manual (Page 16)

English-14
Connections
NOTE: Do not connect/disconnect cables when turning on the monitor or other external equipment as this may result in a
loss of the monitor image.
Before making connections:
* First turn off the power of all the attached equipment and make connections.
* Refer to the user manual included with each separate piece of equipment.
Wiring Diagram
Connecting
terminal
DVD/HD1 (3RCA)
DVI (DVI-D)
HDMI
DVD/HD+VIDEO
VIDEO1 (BNC&RCA)
S-VIDEO
VIDEO2 (5BNC)
DVD/HD2 (5BNC)
VGA (D-Sub)
DVI (DVI-D)
RGB/HV (5BNC)
DisplayPort
DVI (DVI-D)
Setting in Terminal Mode
-
DVI MODE: DVI-HD
RAW/EXPAND* 1
SCART: ON
-
-
BNC MODE: VIDEO
BNC MODE: COMPONENT
-
DVI MODE: DVI-PC
BNC MODE: RGB
-
DVI MODE: DVI-PC
Input signal
name
DVD/HD1
DVI
HDMI
SCART
VIDEO1
S-VIDEO
VIDEO2
DVD/HD2
VGA
DVI
RGB/HV
DPORT
DVI
Connecting
Audio terminal
AUDIO IN1, IN2, IN3
AUDIO IN1, IN2, IN3
HDMI
AUDIO IN1, IN2, IN3
AUDIO IN1, IN2, IN3
AUDIO IN1, IN2, IN3
AUDIO IN1, IN2, IN3
AUDIO IN1, IN2, IN3
AUDIO IN1, IN2, IN3
AUDIO IN1, IN2, IN3
AUDIO IN1, IN2, IN3
DPORT
AUDIO IN1
Input button
in remote control
DVD/HD
DVI
HDMI
DVD/HD
VIDEO
S-VIDEO
VIDEO
DVD/HD
VGA
DVI
RGB/HV
DISPLAYPORT
DVI
Connected
equipment
AV
PC
Media Player
• AUDIO IN 1, 2 and 3 can be used for audio input. To select audio source [IN1], [IN2] or [IN3] in AUDIO INPUT in OSD
menu or press the AUDIO INPUT button (remote control).
DVD player
with HDMI out
DVD player
VCR or DVD
Player
Stereo Amplifier
Second monitor
Computer (Analog) Computer (Digital)
DVD player with
SCART OUT
*1: depend on signal type.