Nikon S51c - Manual (Page 161)

147
Choosing the Desired SSID and Uploading Pictures
Wi
re
le
ss Se
rvi
ces
k
Message Displayed During Transfer
The message shown at right is displayed in the monitor during
picture transfer. The antenna icon in the top left corner of the
monitor indicates signal strength (5-levels). The icon changes
to red when outside the network area. When signal strength is
poor, remove any obstacles between the camera antenna and
access point. To cancel the current transfer, press d.
k
Wireless LAN LED
The wireless LAN LED (c 6) is located on the side of the camera (inside the antenna). The
camera is searching for profiles when the LED blinks, a wireless connection is established
when the LED is lit, and the camera is disconnected from a wireless LAN when the LED is off.
If transfer is not performed for a while, the LED may blink to save power.
k
The Memory Card Write-Protect Switch
When the memory card write-protect switch is in the “lock” position, transfer over a wireless
LAN connection cannot be performed.
l
Checking SSID Contents
Pressing v (l) in the SSID selection screen displays the
network name (SSID) and the profile type.
I
Cancel
0 0 2 / 0 0 4
Transferring images
to server.
11MB:Available
Back
S S I D : M y N e t w o r k
Ty p e : H o m e S S I D