Niles Audio HT-MSU - Manual (Page 23)

NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 305-238-4373
21
SPECIFICATIONS
HT-MSU
Power Requirements: 12VDC 1.25A Regulated In-line Power Supply (Included)
Unit Dimensions: 10.52” x 5.85” x 1.01”
(26.72 cm x 14.86 cm x 2.57 cm)
Wiring Requirements: RG59 CL Antenna Cable (included), CAT-5 cable, 3 conductor 22-gauge
cable, and 2 conductor 22-gauge cable
Trigger Output Voltage: Three assignable outputs at 12VDC 150mA
Contact Closures: Three assignable Normally Open/Normally Closed contact closures rated to
handle 12v @ 5 amps each
IR Ports: 8 Routed IR Flasher Ports and 1 Routable Global IR Output Port
RS232 Ports: 8 Routed RS232 Output Ports
IR & RS232 Code Memory: 4000 commands depending on brand type and model of source
Sequence capability: 450 thirty-two step sequences
Sequence Delays: .1 to 20.0 seconds per step
Component Synchs: 8 Power Status Synch ports rated to sense 12V 150mA input signals or video
voltage
IR Bandwidth: Compatible with virtually all brands of remotes using carrier frequencies between
26 and 105kHz
RF Section: 2.4-gigahertz frequency ZigBee
® wireless mesh technology
Signal Range: 75 to 100 feet open air (22.86 to 30.48 meters)