NComputing L300 User Manual

Page 15

Advertising
background image

L300/L230/L130 User Manual


15


L130 and L230 Device Setup


The access device must be connected via Ethernet to the host PC. This can be done using an Ethernet switch,
a router, or some other network connection method.

Network connection

If the network is configured to use DHCP to get dynamic IP addresses, you can set up the access device to
use it. Turn on the access devices and once you see the main screen select the "Options" button, and then
select the “Setup” button.

In the "Network" tab, select whether to use a dynamic IP address or a static IP address.

If you choose to use a dynamic IP address, click on the "Save" button.

Advertising
This manual is related to the following products: